Alcoa Fastening Systems & Rings Aerospace
Search Catalog 
 Catalog    RFPBT9500 Broach Tool - Hand Held
AFSR Notices and Disclaimer
Catalog > Fluid Fittings > Fluid Fitting Tools > RFPBT9500 Broach Tool - Hand Held > View Items 
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

RFPBT9500 Broach Tool - Hand Held

Check up to five results to perform an action.

Broach Tool - Hand Held, PS10040 Port Serrations

NOTES: Unless Otherwise Specified
  • Replacement cutters may be purchased individually
  • Inspection of noted runout and use of controlled minor diameter per Rosan PS10035 port spicspecification will provide an allowable maximum runout of .009 between serration major diameter and controlled minor diameter after broaching.
APPLICATION: This broach tool, when used in arbor, hydraulic presses or manually, is designed to produce serrations in the counterbore wall of ports prepared per PS10035. The tool will broach aluminum, magnesium, and many steels with hardness of 32 HRC or less. Successful broaching of harder or tougher material may be accomplished, but tool cutter wear is to be expected.

METHOD: The pilot is inserted into the tap drill hole of PS10035 port, and sufficient force applied to the top of the mandrel to allow the cutter to broach into the counterbore. When the external shoulder of the mandrel contacts the internal shoulder of the body*, broaching is complete. If cutter sticks in counterbore, turn the nut in a clockwise direction to extract the cutter. Caution: nut is for cutter removal only and is not a stop. Always back off nut when broaching. Hole can be tapped before or after broaching.


larger image

larger image

Request InformationCompare Items   Results Per Page : 
  Results 1 - 10 of 10 1 

Item #

Cutter Number

A Dia.

B (+.0000/-.0010)


D Hex

E (+.015/-.000)

RFPBT9502 RFPBT9502-3 0.980 Inch 0.4037 Inch 5.400 Inch 0.620 Inch 0.061 Inch
RFPBT9503 RFPBT9503-3 N/A N/A N/A N/A N/A
RFPBT9504 RFPBT9504-3 1.070 Inch 0.5229 Inch 5.550 Inch 0.810 Inch 0.061 Inch
RFPBT9505 RFPBT9505-3 1.290 Inch 0.5854 Inch 5.480 Inch 0.940 Inch 0.061 Inch
RFPBT9506 RFPBT9506-3 N/A N/A N/A N/A N/A
RFPBT9508 RFPBT9508-3 1.450 Inch 0.8898 Inch 5.700 Inch 1.123 Inch 0.061 Inch
RFPBT9510 RFPBT9510-3 N/A N/A N/A N/A N/A
RFPBT9512 RFPBT9512-3 N/A N/A N/A N/A N/A
RFPBT9516 RFPBT9516-3 N/A N/A N/A N/A N/A
RFPBT9520 RFPBT9520-3 N/A N/A N/A N/A N/A
  Results 1 - 10 of 10 1 
Copyright © 2015 Alcoa Inc.